Uses for our ferrite pot magnets:
Our Ferrite Pot magnets have a mild steel casing over a ferrite ring magnet with a countersunk hole for attaching to non-metallic surfaces with a screw. With no moving parts and permanent magnetic power, this ferrite pot magnet requires no maintenance and is unaffected by corrosive elements. The cap adds to the initial cost of the magnet but the added damage protection and improved holding power make them a practical alternative to more expensive materials.
NB: Do not overtighten attachment screws as this can potentially cause the magnet to become damaged or crack.
Other sizes and attachment variations are shown in the table below.
ModelNo. |
D |
d1 |
Magnet Bore
|
Pot Bore |
H |
Pull force |
Weight (g) |
89016 |
40 |
|
8.6mm |
M5 thread |
8 |
7 Kg |
0.0950 |
89017 |
25 |
|
C/sunk |
4.8 |
8 |
|
0.0170 |
89018 |
32 |
|
C/sunk |
5.8 |
7 |
|
0.0280 |
89019 |
36 |
|
9mm hole |
4.8 |
7 |
|
0.0370 |
89020 |
55 |
|
22 |
4.6 |
11 |
12 Kg |
0.0600 |
89030 |
88 |
|
32 |
13.6 |
18.5 |
30 Kg |
0.0700 |
89031 |
90 |
32 |
C/sunk |
4.6 |
12 |
30 Kg |
0.0700 |